041 - Smugface

I now officially have a smugface due to getting my last commitment into the Independent Characters Hobby Progress Challenge2016. The Independent Characters website is here.  I started the army in February and had to do a commitment a month until I have 10 completed commitments. As you can see I have got done quite early. This is mainly because I have made quite manageable commitments because I knew if I fell behind at all I wouldn't get the project done. But I did complete it and here is the army in all it's glory:

I chose 30k Word Bearers on a bit of a whim due to the fact they are in the Betrayal at Calth. I really got into the army while I was painting it up. 

I was really happy with the colour scheme and the red that I managed to get on the models. The shoulder pads are red rather than black but I just wanted my models to stand out a little.

The  army is a little light on infantry but I find painting big blocks of small models quite a chore and that the quality really starts to suffer after a while so I tried to mix it up with different unit types.

I am super chuffed with the army. It was a sprint finish at the end but it's completed to a decent tabletop standard which is what I was aiming for. I am going to do some objective markers and possibly a display board soon but I'm proper chuffed to have got the models done. I may add new units in the future but right now I think I need to paint something that isn't red!
I'm not a very good nor fast painter so it is a bit of a chore to me, so doing the HPC was a revelation. I was so motivated and really hope to do it next year but maybe be a little more ambitious with my commitments. Big loves to all the commentors with the advice and really friendly comments and finally a big thanks to Loopy on the forums for setting this up. You are awesome man! I can't wait for next year!

040 - Rhino Rush (Well not quite)

I am currently finishing off my Word Bearers force for the IC's Hobby Progress Challenge. I haven't used the newer Rhino kit which is a bit sad as it came out about fifteen years ago! Here is a work in progress shot:

They were really good models to put together and relatively easy. I could see these being a mainstay of any future Marine armies I do.
However the basic Rhino costs 35pts and the real life cost from Games Workshop is £22.50 it make it one of the poorest pounds to points models in the entire range. Not quite as bad as Mechanicum Thralls but getting there!
I fancy doing a few more of these in the future and possibly even some of the variants suh as Razorbacks and Vindicators.
I only have a couple of more
units to go before my Hobby Progress Challenge is completed so I better get cracking!

039 - HPC Halfway

So in January I decided to get a little more structured with what I was going to paint. I started recording my painting progress with a Kaban board and keeping a better record of what I have done. I have also joined the Independent Characters 2016 Hobby Progress Challenge. The Independent Characters is an amazing podcast that is back after a year long hiatus. The website for the podcast is here and the forums for the Hobby Progress Challenge can be found here. The rules are simple, you just commit to painting a unit (or units) each month and post a  photo of the unpainted miniatures on the forums. You have a month to paint them and when they are done you post a photo up of them completed. 

So lets have a look at my first five commitments:

January was a Betrayal at Calth Contemptor Dreadnought. I really like the model and feel like people were a little down on it compared to the rest of the boxed set but it ticks all the boxes for me. I did quite a few layers of Khorne Red to get the smooth surface on the model.

My second model in the challenge was a Land Speeder that I had leftover from another project and I used mk4 armour to model the crew. I like the fact a "Chaos" army can use a Land Speeder and was quite happy to put the Octed symbol right on the front of the model. I am going to go back and add a havoc launcher to it so it has a little extra firepower than a single heavy bolter.

I converted this Mortis Comtemptor from the Betrayl at Calth Dreadnought by just swapping over the close combat weapon with a spare assault cannon. I also popped a radar dish on the top to represent the Helicial Targeting Array.

This is my first tactical squad.I kept them quite simple to paint with minimal equipment modelled on them. I wanted them to look like foot sloggers rather than the super elite of the legion. 

This the second tactical squad. I have painted them shoulder pads red rather than black as i wanted them to look slightly different to other Word Bearers armies. I like the fact there are hundreds of thousands of marines in a legion so there can be some variation with the colour schemes.

Doing this challenge has been a great shot in the arm and I will have a decent looking army by the end of the year if all goes to plan which for a slow painter like me is very exciting. I would recommend this kind of scheme for projects. Next up are some characters to lead the force. Maybe even some tanks as well!

038 - Deathwatch Marines

I was really excited when Deathwatch: Overkill came out. The game looked good but the thing that seemed to really catch people's eye was the miniatures. The Genestealer Cult is great. It is an update of iconic models and concepts which were a fundamental part of what defined Warhammer 40,000 when I first got into the hobby. However the thing that really got me was the Deathwatch!
The Deathwatch are a cool idea and the new models represent the diverse chapters working as different parts to become more effective as a whole. This mirrors how the original twenty legions were designed by the Emperor to work together and compliment the strengths and inherent abilities of each other.
One Deathwatch marine stood out for me was the Iron Hand Ennox Sorrlock. I wanted to use that model as the basis for a Heresy era Techmarine. The body fit in with the right armour but this left me two Deathwatch arms and and a combimelta which didn't fit in with the time period. So having a few marine spares I cobbled together a Deathwatch Iron Hands marine which I intended to be just a one off model for a bit of fun.
But Games Workshop brilliantly released rules for both factions in the board game. So armed with rules I began thinking I could make my own Deathwatch team with the same wargear and use the rules that have been released.
It may only be eleven models but I can stretch this out and do a few models at a time and use it as a bit of palette cleanser between bigger squads and vehicles for other projects. I won't feasibly be able to substitute certain models without putting in alot of work so the Salamander, Imperial Fist and White Scar will be bought off Ebay and converted somehow to make them look a little more individual.
So my first models that are going to get made is my version of squad Donatus.

I have the basis for the models and the parts for the weapons in my bits box. I will have to buy the Deathwatch upgrade sprue for the shoulder pads but I am okay with that. as that will give me enough pads for all eleven and a few spares as well. 

Here is a quick work in progress picture of my Dark Angel, Space Wolves and Iron Hands marines.

I am quite excited about this small project and hopefully it will keep my creative juices flowing in the future. 

037 - 2016 Half Century

So it's 2016 and I said at the start of the year I would document my painting progress. Having a quick look at my makeshift Kanban Board I realised that I was on my 50th model for the year. Luckily it was a nice character model. So say hello to my 50th model, my 30k Word Bearers Chaplain.

I was quite happy with the paint job and it all seemed to work out so go me!

However I have to try and paint 100 models or more for the entire year. Boo pressure!

036 - Inside The Silver Tower

I got all excited and bought Warhammer Quest Silver Tower. I haven't had chance to play yet but wanted to do a few photos of what you get in the actual box.

So here is the front. Gorgeous art work with the Stormcast Eternal featuring really prominently.

The box is rammed full of contents. To save a copying a load of text down here is a shot from the back of the box.

I'm a big fan of the amount of miniatures you get and you can download warscrolls to include them in the Age of Sigmar which is a nice touch. You can get them here. My one criticism of the original Warhammer Quest is just using the models in the game as game pieces and not on the tabletop but this is a great solution!

First up are the heroes, the Gaunt Summoner and the Ogroid Thaumaturge . The Ogroid Thaumaturge is a fantastic new addition to the Chaos Grand Alliance and the model is a great sculpt. The heroes have alot of detail and some really nice touches.

The you get two sets of this sprue with the lower level gribblies on it. I'm looking forward to getting some paint on the Grot Scuttlings.

You also get some hero cards a couple of decks of really nice cards and a few different rulebooks.

The board sections look fantastic and they are surprisingly big and thick!

So that's a very quick run-down of the contents of the box. I will do some posts when I either get t play or when I paint some of the models. The quality is the usual high Games Workshop standard and I'm really happy with what I have got with this game. I can't wait to get stuck in!

035 - Winding up the Wolves

So I'm finishing one of my armies. I'm going to stop adding to my 30k Space Wolves. The intention before was to do a massive army but with my Word Bearers and other projects taking my time I decided to finish the models I had assembled and have a completed army.  If I'm honest with myself I won't keep adding models here and there and it would be best just to finish the whole thing rather than disappoint myself in the future.It's around 3000pts which is a decent size and I have quite alot of variety in there so I'm pretty happy with it.
I just finished my last model which was my Praetor which I made from The Betrayal at Calth Chaplain and some bits from the plastic Space Wolves upgrade sprue.

So I have got well into collecting my 30k Space Wolves. The initial plan was to kit bash most of them not only because of the lack of Space Wolves Forge World models at the time but also due to the fact I love modelling. However I didn't want them to look like 40k Space Wolves with a different colour scheme so I'm reigned in the use of the 40k kits. I was initially unconcerned about the "official" Space Wolves models eventually coming out from Forge World figuring when they came out I could either mix them in with the kit bashed models or use them as veterans or a command squad depending on how different in tone and style they are. But when I saw them they seemed completely different and wouldn't fit in with the other guys in the force. I don't feel like I've failed in making a good looking Heresy Space Wolves army but I wanted a cohesive force and mixing my kit bashed models and the new resin just wouldn't sit right with me.
As for the size of my army I intended to do a unit for each slot in the force organisation chart. This would have been a massive sized army and although the intention was to have this project last a couple of years, I feel it has ran it's course. I didn't rush painting and collecting this army and feel like I have a decent looking balanced force.
I will do a full gallery of the army in  the future as I'm quite proud of it. Until then happy gaming!